This Compressor Kit Fits the Following Vehicles:2007-2010 Audi Q72005-2012 Volkswagen Toureg
-Fast Free Shipping-Includes Drier & O-Rings-Ships Pre-Charged with PAG Oil-One Year Warranty-Quality Product-Bottle PAG Oil 46(will filled it in the Compressor during shipping)
Order Details:Tomaking sure that this part will fit your vehicle, please send us the Vin Number or Make, Model, Year and Engine size of your vehicle so we may confirm it for you.We also recommend using the compatibility chart in order to make sure that this compressor will fit your vehicle.
Things that you should do:If you’re replacing an A/C Compressor, you have to be prepared to replace additional components in the system depending on the reason why your own compressor failed.The information provided below was made to help you save Time and Money.Here are some examples of common issues:
1-Compressor locked or free up:If your compressorlocked or free upinternally it was due to insufficient refrigerant, oil in the system.leading to overheating of the compressor which caused a breakdown of internal parts.
Visible symptoms:
The oil in the compressor is black and or has aluminum particles in it.
The belt Snapped or Making Squeeze when the a/c is turned on.
The engine feels like it’s going to turn off.
What you should do:
1. Replace the A/C Compressor (Compressor had contains PAD OIL)
2. Replace the Receiver Drier/Accumulator
3. Replace the Expansion Valve/Orifice tube
4. Flushing the a/c lines, condenser and evaporator is REQUIRED (We professionally recommend to replace the condenser on
modern vehicles since the passage on the fins are so small that a flush will not remove all contaminants).
5. Vacuum the system for 30 – 45 minutes. This will remove any moisture in the system.
6. Add the correct amount of refrigerant to the system.
7. Run vehicle on lowest fan setting for about 3 minutes to allow the compressor to cycle the refrigerant and oil.
8. Check the Condenser Fan Clutch or Fan, if it lose or intermittent. Please replace it.
The reason why it’s important to replace the additional parts listed is because if you add a new compressor to a contaminated
system, the compressor will cycle the contaminants and will eventually lock up again.
There are two possible reasons why your compressor is making noise.
First being that the compressor is suffering from internal damage due to a lack of refrigerant or oil
in the system.
This is an early sign that the compressor will seize, please go back to the first example and follow
the instructions.
The second reason is that the bearing on the compressor is bad.
Visible symptoms:
The compressor makes noise when the a/c is on or off, the clutch has a red/brown discoloration caused by overheating.
What you should do:
With the right tools and some mechanical knowledge, you can replace the bearing on the compressor without having to remove it
from the vehicle. We carry almost all bearing sizes for a/c compressor clutches. Please contact us and we will provide you with the
item number so you may purchase the clutch bearing.
If the compressor does not engage even though the system is properly charged, the coil may no longer be functional. This can
bean electrical issue of the vehicle or the coil may have suffered from overheating of the compressor.
Visible symptoms:
The epoxy in the coil has bubbles, cracks and looks “dried out”.
What you should do:
Replace the clutch assembly or the a/c compressor. Please contact us for availability.
Visible symptoms:
UV dye is found on the shaft or body of the compressor.
What you should do:
Replace the compressor and conduct a leak test in order to ensure that there are no other leaks in the system.
Note: These are the most common issues found when it comes to a faulty compressor. We always advise that you take your
vehicle to an ASE certified mechanic that is able to properly diagnose your a/c system and determine the problem. There are other
problems that may be present in your system which may not be listed on here. If you still have questions, do not hesitate to contact
us, we are here to help.
Tips:
-CONTACT US. We are dedicated professionals that only deal and specialize in automotive air conditioning. We can assist
with any installation questions, system capacity requirements and have all additional parts for your a/c system.
-After checking or filling the oil, turn the clutch on the compressor 10 times to distribute the oil inside.
-Always check how much oil the compressor contains even if it’s brand new. You do not want to end up doing the job twice
simply because there was an insufficient amount of oil added to the compressor.
-Replace the schrader valves anytime you service your a/c system.
-Check relays and pressure switches.
-After flushing, make sure that there is no flush liquid in the system by using compressed air or nitrogen.
-Make sure the condition of the condenser is so that the performance is sufficient to maintain proper temperature in the
system.
A non-conforming condenser may cause overheating of the compressor
Shipping:
Expedited Shipping: isFreewithin all 50 United States and including Alaska and Hawaii (2-3 Business Days)
U.S.Territories:
- Puerto Rico
- North Marina Islands
- Virgin Islands
- American Samoa
- Guam
May take 3-5 Business days
International Shipping: iscalculated based on your location. (May Vary 1-5 weeks)
California Sales tax:California buyers will be charged 8.25% sales tax
Contact:
The best way to contact us is by clicking on thecontact sellerlink on the listing so that we know which itemspecificallytoassistyou with.
