For 2010-2016 Cadillac SRX Halogen Projector Headlights Set Replacement Lamps
Item Fit For CADILLAC 2010-2016 SRX 4 Door Sport Utility
- Note: Only compatible with Halogen headlight models
- Note: Don't compatible with Xenon HID headlight High Beam Bulb Type: 9005 (Bulbs included)
- Low Beam Bulb Type: H11(Bulbs included)
- Turn Signal Bulbs Type: 7444NA (Bulbs included)
- Placement on Vehicle: Ledt, Right, Front
- Made of materials that meet or exceed OEM requirements.
- Chrome Housing with Clear Lens
- Made of materials that meet or exceed OEM requirements
PACKAGE INCLUDES:
- 1 Pair LH (Driver Side) + RH (Passenger Side) Headlights
INSTALLATION GUIDE:
Before you begin to adjust the light, make sureto check the alignment of your lights first. Park the vehicle about 10 to25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than3.5 feet above the ground.
1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair infront of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights andcounterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the lightbeam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustmentcorrect. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. Test your results.
More Display:
On Apr 8, 2024 at 22:27:33 PDT, seller added the following information:
On Jun 6, 2024 at 20:31:46 PDT, seller added the following information:
